New Relic 檢查
newrelic 模組有 6 項檢查。New Relic APM 應用程式及綜合監控的黃金信號,由 New Relic 數據源根據其已讀取的 New Relic 實體摘要(NerdGraph entitySearch)提供。主機的黃金指標則改為提供給 Windows 及 Linux 主機檢查。
本頁面在建置文件時由產品的檢查目錄產生,因此規則、間隔及預設嚴重程度一律與你正在閱讀的版本相符。閾值是預設值;實體和資源可以覆蓋這些閾值。
| 檢查 | 間隔 | 預設嚴重性 | 規則 |
|---|---|---|---|
newrelic.apm_apdexApplication Apdex | 300s | warning | warning < 0.85 · 10m / critical < 0.7 · 5m |
newrelic.apm_error_rateApplication error rate | 300s | warning | warning > 2 percent · 10m / critical > 5 percent · 5m |
newrelic.apm_response_timeApplication response time | 300s | warning | warning > 1000 milliseconds · 10m / critical > 3000 milliseconds · 5m |
newrelic.apm_throughputApplication throughput | 300s | info | ±3σ over 7d (learning only) |
newrelic.monitor_failing_locationsSynthetic monitor failing locations | 300s | critical | warning >= 1 count / critical >= 2 count |
newrelic.monitor_success_rateSynthetic monitor success rate | 300s | warning | warning < 98 percent / critical < 90 percent |
檢查
newrelic.apm_apdex
Application Apdex
- 量度
apdex· 每300s·newrelic- 規則
warning < 0.85 · 10m / critical < 0.7 · 5m· 預設嚴重性: warning- 措施
- —
- 基準
- Apdex 0.85 and above is good; below 0.7 users are frustrated. Each application's own Apdex T applies. · 來源
newrelic.apm_error_rate
Application error rate
- 量度
error_rate(percent) · 每300s·newrelic- 規則
warning > 2 percent · 10m / critical > 5 percent · 5m· 預設嚴重性: warning- 措施
- —
- 基準
- Share of transactions with errors (New Relic reports a ratio; stored as a percentage).
newrelic.apm_response_time
Application response time
- 量度
response_ms(milliseconds) · 每300s·newrelic- 規則
warning > 1000 milliseconds · 10m / critical > 3000 milliseconds · 5m· 預設嚴重性: warning- 措施
- —
- 基準
- Average across all transactions; tune per application (entity override).
newrelic.apm_throughput
Application throughput
- 量度
throughput_rpm(per_minute) · 每300s·newrelic- 規則
±3σ over 7d (learning only)· 預設嚴重性: info- 措施
- —
- 基準
- Requests per minute; a sudden drop usually means traffic is not reaching the application.
newrelic.monitor_failing_locations
Synthetic monitor failing locations
- 量度
failing_locations(count) · 每300s·newrelic- 規則
warning >= 1 count / critical >= 2 count· 預設嚴重性: critical- 措施
- —
- 基準
- One failing location can be the probe's network; two or more mean the endpoint is failing. · 來源
newrelic.monitor_success_rate
Synthetic monitor success rate
- 量度
success_rate(percent) · 每300s·newrelic- 規則
warning < 98 percent / critical < 90 percent· 預設嚴重性: warning- 措施
- —
- 基準
- Share of successful checks over New Relic's summary window.